● Large setting range
● Small hysteresis
● Optical operating display (LED)
● Change-over contact
● Clip fixing
The electronic thermostat is used for controlling heating and cooling equipment, filter fans or
signal devices. The thermostat registers the surrounding air and can switch both inductive and
resistive loads via relay with change-over contact. The LED integrated in the adjustment knob is
lit when the N contact is closed (e.g. when a connected heater is operating).
| Switch difference temperature) | 4K (±1K tolerance) at 20°C/68°F |
| Sensor element | NTC |
| Reaction time(humidity) | approx.5 sec |
| Contact type | Change-over |
| Service life | > 50000 cycles |
| Max.Switching capacity(Relay output) | 240VAC, 8 (1.6) A |
| 120VAC, 8 (1.6) A | |
| 24VDC, 4A | |
| Optical indicator | LED |
| Connection | 1.5 mm ⊃ 2; 5 terminals, clamping torque is less than 0.5 2.5 mm ⊃ 2; Rigid conductor line: |
| Mounting | Clip for 35mm DIN rail, EN6075 or for exit filter EF 118 Series |
| Casing | Plastic according to UL94 V-0, light grey |
| Dimensions | 64.5 x 42 x 38mm |
| Weight | Approx.70g |
| Fitting position | Vertical |
| Operating/Storage temperature | 0 to +60°C (+32 to +140°F) / -20 to +80°C (-4 to +176°F) |
| Operating/storage humidity | 90% RH |
| Protection type | IP20 |
