Introduction
The RTC70.xx is used for 2-position control with on/off output for the control the temperature by means of an NTC sensor placed externally or internally in the thermostat. the thermostat acquires the room temperature with its built-in sensor or floor sensor, and the heating contact will close when the room temperature falls below the selected setpoint.
Application
For the control of warm-water(floor)heating systems and direct electric heating systems used in Commercial buildings, Residential buildings , Light in dustrial buildings...
Features
LED in dicator is light when heating is onwith manual switch and knob for easy operation ON/OFF control output for heating device
| Voltage | AC230V |
| Power consumption | 5W |
| Setting range | 4℃~45℃ |
| Switching differential | ±0.5k |
| Ambient temperature | -5℃~50℃ |
| Protective housing | IP20 |
| housing material | Self-exting uishing PC |
| Floor sensor | Rubber-thermoplastic NTC sensor |
| The external sensor | Cable length is 3m |
